3.0×1600 Slitting & Cutting to length line
Home > Products » 3.0×1600 Slitting & Cutting to length line

3.0×1600 Slitting & Cutting to length line

3.0×1600 Slitting & Cutting to length combination line is slitting the steel coil after leveling, then cutting after fine leveling. Save part equipments such as coil car, decoiler and coil unwinding & leading equipment. Can slitting and cutting into needed length or width, last collecting into stack.

  • Product Details
  • Videos
Line parameter(For reference)
Steel coil parameters
1.Raw material: Hot or cold rolled steel, galvanized steel,
color steel, hard Aluminum
2.Raw material strength: σs≤235Mpa σb≤500Mpa
3.Raw material thickness: 0.5~3.0mm
4.Coil width: ≤1600mm
5.Suitable coil ID: Φ508mm
6.Suitable coil OD: Φ1000~Φ1800mm
7.Coil loading capacity: max 10T
Finished products parameters
Slitting products parameters
1.Slitting pieces numbers: 
0.5mm≤t≤3.0mm, max 8 pieces
2.Slitting width: ≥35mm
3.Slitting width tolerance: ≤±0.05mm
Cutting products parameters
1.Cutting length: 1000~8000mm
2.Cutting length tolerance: ≤±1mm/3m
3.Diagonal tolerance: ≤±1.5mm/3m
4.Final products rack capacity weight :8000kg max height 400mm 
Other parameters
1.Machine speed:
Cutting: ≤30m/min
Slitting: ≤120m/min
1.Slitting mode: Dynamic shear
2.Electric source: 380V/60HZ Three phases five wires system
3.Total power: 260kw
4.Driving motor:
Fifteen rolls leveling machine: AC adjustable speed motor AC55kw
Slitting machine: DC adjustable speed motor DC55kw
Rcoiling machine: DC adjustable speed motor DC75kw
5.Floor space: Length32m x Width9.5m 
6.Working direction: From the left to the right(Facing line on the operation table side)
7.Operator numbers: Two technical workers, two common workers