Strut Roll Forming Machine
Home > Products » Strut Roll Forming Machine

Strut Roll Forming Machine

Strut Roll Forming Machine

Inquire >
  • Product Details
  • Videos
  • Inquiry

Technical parameters

Product length:   3000 mm~ 6000 mm

Parameters of the raw material:
Material                Thickness        Width                            I.D.               Max. O.D.   Yield strength     Max. coil weight
SS316L,
Cold rolled steel      1.5, 2,
                           2.5 mm         According to the profile   Ф508 mm          Ф1200 mm    ≤400Mpa             3 T
Quality requirements of the raw material
Thickness Tolerance      Width Tolerance           Steel straightness          I.D. Tolerance      Material standard
± 0.07 mm                   +0 mm/-0.2 mm          0.2 mm/m                   ±15 mm                GB

Note
Plate surface unevenness tolerance: ≤10% of the steel thickness)
If the plate with a coating, the coating should be consistent with the coating inspection standards of the relevant color-coated, should not have skin off, so as not to affect the quality of roll forming.
If the material is galvanized steel, the galvanized should be consistent with the relevant testing standards of the galvanized steel, should not have zinc layer off, so as not to affect the quality of roll forming.
Main Technical conditions of the production line:
Temperature:                    -10℃~35℃ 
Voltage:                        415V, 50 HZ, 3 P
Gas pressure:                    0.6~1.2 Mpa
Total gas:                       300 L/min
Total power:                     ≈80 KW
Machine group operation direction:                 From left to right.
                                     (Facing the operational panel)
Production capacity:                 8 m/min (according to the basic length: 3000mm )
Dimension (L*W*H):                            L≈ 28 m, W≈ 5 m, H≈ 2 m
Specification of the shipping container:(the number is estimated ≈, final data should be confirmed in two weeks before delivery.)
Container 40GP 40OH 40OT 20GP 20OH 20OT
 Product process flow:
Decoiling → Levelling → Loop → Servo Feeding → Punching Machine → Loop → Roll Forming 

→ Cut To Length → Run Out Table

Profile drawing