Stud Mill Roll Forming Machine
Home > Products » Stud Mill Roll Forming Machine

Stud Mill Roll Forming Machine

Stud Mill Roll Forming Machine

  • Product Details
  • Videos
Parameters of the raw material
Material Thickness Width I.D. Max. O.D. Yield strength Max. coil weight
Cold rolled steel 1mm According to the profile Ф508 mm Ф1200 mm ≤300Mpa 2 T
Thickness Tolerance Width Tolerance Steel straightness I.D.Tolerance Material standard
± 0.07 mm +0 mm/-0.2 mm 0.2 mm/m ±15 mm GB
Note:
Plate surface unevenness tolerance: ≤10% of the steel thickness)
If the plate with a coating, the coating should be consistent with the coating inspection standards of the relevant color-coated, should not have skin off, so as not to affect the quality of roll forming.
If the material is galvanized steel, the galvanized should be consistent with the relevant testing standards of the galvanized steel, should not have zinc layer off, so as not to affect the quality of roll forming.
Main Technical conditions of the production line:
Temperature: -10℃~35℃
Voltage: 380V±10%, 50 HZ, 3 P
Gas pressure: 0.6~1.2 Mpa
Total gas: 300 L/min
Total power: ≈22 KW
Machine group operation direction: From left to right.
(Facing the operational panel)
Production capacity: 20 m/min (excluding cutting time )
Dimension (L*W*H): L≈ 10 m, W≈ 2 m, H≈ 2 m
Specification of the shipping container:(the number is estimated ≈, final data should be confirmed in two weeks before delivery.)
Container 40GP 40OH 40OT 20GP 20OH 20OT
Number 1
Product process flow:
Decoiling → Punching Machine → Roll Forming → Cut To Length → Run Out Table
Profile drawing